Round Dining Room Table Sets

The family Round dining table sets is a central part of many families, a place where memories are made and where many have eaten.  Make time for the family even more valuable by designing the family dining table yourself.  It might be a lot cheaper to buy a dining table, especially if you are considering handmade options.  You can vary the dimensions depending on the room and family size.

manual

Sand down all of the dining table components: two side skirts made from one by four wood at 66 inches.  Use a sander or sandpaper and sanding block.  Make aprons in a rectangular frame.  Round dining table the corners with a tape clip to hold the shape.  Screw together with a 5 cm long wood screw and remove the strap clamp.  Insert the five support boards between the side skirts, evenly spaced along the length and flush with the underside of the ramp frame.  Secure them with two 2-inch wood screws on each end in the same way as the secured panel frame.

Pearl glue along the edges of table boards and mount them side by side to form a single round dining table top 36 by 70 inches.  Use tape clamps to clamp the planks in place while the glue dries.  Turn the table right side down.  Apply glue to the bottom of the ramp frame and support.  Center the apron frame over the table top with the brackets moving the table top.  Pre-drill two recessed pilot holes through support boards in each board of the table.  six holes per support plank.  Attach the table top to the frame by screwing in an 08/05 inch wood screw.

–>